Distance from Prague to Shenzhen
Straight line
By road
Travel time
Direction
Open in the calculator (stops, directions, fuel cost) → Shenzhen → Prague
How far is Prague from Shenzhen?
Prague (Czechia) and Shenzhen (China) are very far apart: 8,773 km in a straight line, that is 5,452 miles or 4,737 nautical miles. The distance is measured over the Earth's surface (WGS84 ellipsoid) along the shortest possible path.
By road, Prague to Shenzhen is 10,536 km (6,547 miles), about 126 h 56 min by car on the fastest route, without traffic or stops. The road is 20% longer than the straight line.
From Prague, Shenzhen lies to the east (initial bearing 68°). The route crosses from Czechia into China. The halfway point is at 48.0930°, 76.2884°.
A direct flight would take about 11 h 28 min (800 km/h cruise plus take-off and landing). The road distance and driving time are calculated on the map from OpenStreetMap roads.
Other distances from Prague
- Prague – Dresden 117 km
- Prague – Chemnitz 134 km
- Prague – Brno 186 km
- Prague – Linz 198 km
- Prague – Leipzig 200 km
- Prague – Wrocław 216 km
- Prague – Halle (Saale) 231 km
- Prague – Nürnberg 250 km
- Prague – Vienna 253 km
Other distances from Shenzhen
- Shenzhen – Kowloon 28 km
- Shenzhen – Hong Kong 32 km
- Shenzhen – Dongguan 62 km
- Shenzhen – Guangzhou 105 km
- Shenzhen – Foshan 110 km
- Shenzhen – Yunfu 212 km
- Shenzhen – Jieyang 260 km
- Shenzhen – Shantou 286 km
- Shenzhen – Zhongshan 385 km
Frequently asked questions
How far is Prague from Shenzhen?
By road it is 10,536 km (6,547 miles) from Prague to Shenzhen; in a straight line it is 8,773 km (5,452 miles).
How long is the drive from Prague to Shenzhen?
About 126 h 56 min on the fastest route (10,536 km), without traffic or stops.
In which direction is Shenzhen from Prague?
Shenzhen is to the east of Prague, at an initial bearing of 68°.
How long is the flight from Prague to Shenzhen?
A direct flight would take about 11 h 28 min at an average cruising speed of 800 km/h.
How is the distance calculated?
The straight-line distance is computed on the WGS84 ellipsoid with the Vincenty formula, accurate to the metre. The road distance comes from OpenStreetMap roads.