Distance from Poltava to Tehran
Straight line
By road
Travel time
Direction
Open in the calculator (stops, directions, fuel cost) → Tehran → Poltava
How far is Poltava from Tehran?
Poltava (Ukraine) and Tehran (Iran) are quite far apart: 2,064 km in a straight line, that is 1,283 miles or 1,115 nautical miles. The distance is measured over the Earth's surface (WGS84 ellipsoid) along the shortest possible path.
By road, Poltava to Tehran is 2,696 km (1,675 miles), about 37 h 47 min by car on the fastest route, without traffic or stops. The road is 31% longer than the straight line.
From Poltava, Tehran lies to the south-east (initial bearing 132°). The route crosses from Ukraine into Iran. The halfway point is at 42.9511°, 43.9355°.
A direct flight would take about 3 h 5 min (800 km/h cruise plus take-off and landing). The road distance and driving time are calculated on the map from OpenStreetMap roads.
Other distances from Poltava
- Poltava – Kremenchuk 100 km
- Poltava – Kamianske 120 km
- Poltava – Kharkiv 130 km
- Poltava – Dnipro 131 km
- Poltava – Sumy 149 km
- Poltava – Cherkasy 180 km
- Poltava – Zaporizhia 203 km
- Poltava – Kropyvnytskyi 205 km
- Poltava – Kryvyi Rih 206 km
Other distances from Tehran
- Tehran – Karaj 42 km
- Tehran – Isfahan 339 km
- Tehran – Tabriz 528 km
- Tehran – Baku 538 km
- Tehran – Basrah 669 km
- Tehran – Shiraz 684 km
- Tehran – Baghdad 694 km
- Tehran – Mashhad 736 km
- Tehran – Mosul 750 km
Frequently asked questions
How far is Poltava from Tehran?
By road it is 2,696 km (1,675 miles) from Poltava to Tehran; in a straight line it is 2,064 km (1,283 miles).
How long is the drive from Poltava to Tehran?
About 37 h 47 min on the fastest route (2,696 km), without traffic or stops.
In which direction is Tehran from Poltava?
Tehran is to the south-east of Poltava, at an initial bearing of 132°.
How long is the flight from Poltava to Tehran?
A direct flight would take about 3 h 5 min at an average cruising speed of 800 km/h.
How is the distance calculated?
The straight-line distance is computed on the WGS84 ellipsoid with the Vincenty formula, accurate to the metre. The road distance comes from OpenStreetMap roads.