Distance from Liești to Shenzhen
Straight line
By road
Travel time
Direction
Open in the calculator (stops, directions, fuel cost) → Shenzhen → Liești
How far is Liești from Shenzhen?
Liești (Romania) and Shenzhen (China) are very far apart: 7,993 km in a straight line, that is 4,967 miles or 4,316 nautical miles. The distance is measured over the Earth's surface (WGS84 ellipsoid) along the shortest possible path.
By road, Liești to Shenzhen is 10,213 km (6,346 miles), about 126 h 16 min by car on the fastest route, without traffic or stops. The road is 28% longer than the straight line.
From Liești, Shenzhen lies to the east (initial bearing 76°). The route crosses from Romania into China. The halfway point is at 42.6612°, 78.2003°.
A direct flight would take about 10 h 30 min (800 km/h cruise plus take-off and landing). The road distance and driving time are calculated on the map from OpenStreetMap roads.
Other distances from Liești
- Liești – Pechea 22 km
- Liești – Matca 26 km
- Liești – Tecuci 27 km
- Liești – Focșani 28 km
- Liești – Râmnicu Sărat 45 km
- Liești – Galați 46 km
- Liești – Brăila 52 km
- Liești – Ianca 54 km
- Liești – Adjud 60 km
Other distances from Shenzhen
- Shenzhen – Kowloon 28 km
- Shenzhen – Hong Kong 32 km
- Shenzhen – Dongguan 62 km
- Shenzhen – Guangzhou 105 km
- Shenzhen – Foshan 110 km
- Shenzhen – Yunfu 212 km
- Shenzhen – Jieyang 260 km
- Shenzhen – Shantou 286 km
- Shenzhen – Zhongshan 385 km
Frequently asked questions
How far is Liești from Shenzhen?
By road it is 10,213 km (6,346 miles) from Liești to Shenzhen; in a straight line it is 7,993 km (4,967 miles).
How long is the drive from Liești to Shenzhen?
About 126 h 16 min on the fastest route (10,213 km), without traffic or stops.
In which direction is Shenzhen from Liești?
Shenzhen is to the east of Liești, at an initial bearing of 76°.
How long is the flight from Liești to Shenzhen?
A direct flight would take about 10 h 30 min at an average cruising speed of 800 km/h.
How is the distance calculated?
The straight-line distance is computed on the WGS84 ellipsoid with the Vincenty formula, accurate to the metre. The road distance comes from OpenStreetMap roads.