Distance from Bielefeld to Tehran
Straight line
By road
Travel time
Direction
Open in the calculator (stops, directions, fuel cost) → Tehran → Bielefeld
How far is Bielefeld from Tehran?
Bielefeld (Germany) and Tehran (Iran) are very far apart: 3,822 km in a straight line, that is 2,375 miles or 2,064 nautical miles. The distance is measured over the Earth's surface (WGS84 ellipsoid) along the shortest possible path.
By road, Bielefeld to Tehran is 4,895 km (3,041 miles), about 52 h 49 min by car on the fastest route, without traffic or stops. The road is 28% longer than the straight line.
From Bielefeld, Tehran lies to the east (initial bearing 101°). The route crosses from Germany into Iran. The halfway point is at 45.8766°, 33.0795°.
A direct flight would take about 5 h 17 min (800 km/h cruise plus take-off and landing). The road distance and driving time are calculated on the map from OpenStreetMap roads.
Other distances from Bielefeld
- Bielefeld – Münster 63 km
- Bielefeld – Hannover 90 km
- Bielefeld – Dortmund 93 km
- Bielefeld – Bochum 109 km
- Bielefeld – Gelsenkirchen 115 km
- Bielefeld – Bremen 117 km
- Bielefeld – Essen 123 km
- Bielefeld – Wuppertal 129 km
- Bielefeld – Oberhausen 131 km
Other distances from Tehran
- Tehran – Karaj 42 km
- Tehran – Isfahan 339 km
- Tehran – Tabriz 528 km
- Tehran – Baku 538 km
- Tehran – Basrah 669 km
- Tehran – Shiraz 684 km
- Tehran – Baghdad 694 km
- Tehran – Mashhad 736 km
- Tehran – Mosul 750 km
Frequently asked questions
How far is Bielefeld from Tehran?
By road it is 4,895 km (3,041 miles) from Bielefeld to Tehran; in a straight line it is 3,822 km (2,375 miles).
How long is the drive from Bielefeld to Tehran?
About 52 h 49 min on the fastest route (4,895 km), without traffic or stops.
In which direction is Tehran from Bielefeld?
Tehran is to the east of Bielefeld, at an initial bearing of 101°.
How long is the flight from Bielefeld to Tehran?
A direct flight would take about 5 h 17 min at an average cruising speed of 800 km/h.
How is the distance calculated?
The straight-line distance is computed on the WGS84 ellipsoid with the Vincenty formula, accurate to the metre. The road distance comes from OpenStreetMap roads.